Autoglym Polar Blast Wash Seal & Snow Foam Gun Kit
Kit Includes:
- Autoglym Polar Wash 2.5 Litres
- Autoglym Polar Blast 2.5 Litres
- Autoglym Polar Seal 1 Litre
- Autoglym Polar Blaster Foam Gun
Autoglym Polar Blast 2.5 Litres
A rich snow foam applied using a pressure washer or foam gun as a pre-wash stage
Polar Blast is a snow foam that can be applied using a pressure washer or foam gun as a pre-wash stage. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing.
This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination.
Its pH neutral formulation will not remove any existing layers of polish or wax.
Features:
- Highly concentrated snow foam formulation which can be applied using a pressure washer or foam gun
- Covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt
- Reduces the risk of scratches and swirl marks caused by a sponge or wash mitt
- The rich thick foam prevents it from drying quickly
How to use this product:
- Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
- Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam.
- Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.
- Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on.
- Finally, rinse thoroughly from the bottom up.
Autoglym Polar Wash 2.5 Litres
A safe and effective cleaner for home pressure washers
Polar Wash is a safe and effective cleaner that should be applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Polar Blast. This impressive cleaner will cover your vehicle in a blanket of foam that makes light work of dirt, traffic film and road grime removal.
Features:
- A safe and effective cleaner for home pressure washers
- Covers any vehicle in a thick blanket of foam that makes light work of dirt, traffic film etc
- pH Neutral formula is safe for waxes and coatings
- Works in conjunction with Polar Blast for a more deep clean.
How to use this product:
- Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
- We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination.
- Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car.
- Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.
- The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.
- Rinse thoroughly from the bottom up and dry.
Polar Wash is not suitable for use on soft top convertibles
Top Tip: Follow with Polar Seal for a protective, hydrophobic coating
Autoglym Polar Seal 1 Litre
A protective, hydrophobic coating, for a quick and easy high-gloss finish
Polar Seal is a protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface, which reduces the time it takes to dry the car. Simply spray onto a clean, wet vehicle, rinse off and dry to leave behind a high gloss finish
Features:
- Highly concentrated snow foam formulation which can be applied using a pressure washer or foam gun
- Covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt
- Reduces the risk of scratches and swirl marks caused by a sponge or wash mitt
- The rich thick foam prevents it from drying quickly
How to use this product:
- Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
- We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork.
- Only a small amount of Polar Seal is required. Pour no more than 40ml (four capfuls) into your foam bottle and then add at least 200ml of water. This should be all the finished solution required to cover your vehicle. There is no benefit in using any more than 40ml as over application can compromise the finish.
- Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen.
- Thoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur.
- Use Autoglym Fast Glass to clean the windscreen and wiper blades to ensure no smearing occurs.
We do not recommend applying more than once a month.
Polar Seal is not suitable for use on soft top convertibles
Do not store diluted product. Please rinse foam bottle and pressure washer lance after use.
Top Tip: For the optimum finish, dry with the Autoglym InstaDry cloth
Autoglym Polar Blaster Foam Gun
Polar Blaster is a unique foam gun designed to work in harmony with all Polar Series products, providing the speediest way to safely pre-wash, wash and protect your vehicle.
- Designed for all pre-wash foams, especially the Autoglym Polar Range
- Easy to use
- Adjustable dilution and spray pattern
- Ideal for Snowfoams, pre-washes and shampoos
- Produces lashing of thick foam, ideal for pre-washing
The Autoglym Polar Blaster creates lashings of thick, clingy foam with Polar Blast, optimises the density required to efficiently deep clean with Polar Wash and produces the perfect consistency to apply the hyper-hydrophobic Polar Seal in seconds. The adjustable spray pattern allows you to easily follow your cars contours, ensuring total coverage and appropriate dwell time on mud, traffic film and other contaminants. Complete a full exterior car care routine in a way that is quick, fun and safest to your car's surfaces.
How to use this product:
Polar Blaster Assembly:
- Attach the clear Pickup Tube (C) to the brass nozzle on the underside of the Foam Gun Head (B).
- Attach the black end of the Connector (A) to the hand gun on your pressure washer.
- Pull back the spring-loaded brass collar on the Connector (A) and connect it to the silver nozzle on the Foam Gun Head (B).
Polar Blaster In Use:
- Dilute the product at the recommended rate, outlined on the sidewall of the Polar reservoir bottle (D).
- Screw the Foam Gun Head (B) onto the Polar reservoir bottle (D) and attach the Polar Blaster to your pressure washer lance.
- Aiming at the floor, pull the trigger on your pressure washer, allowing the Polar product to feed through.
- Turn the Dial (E) to adjust the foam level and turn the Nozzle (F) to change the spray pattern.
- Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions.
- Rinse the reservoir bottle with clean water after using it with each product.
- Flush through the Polar Blaster with clean water when you have finished using it to apply all intended products.
The Connector (A) is compatible with the Karcher K-Series of pressure washers.
Great affordable product
By: Jason on 28 September 2026Really happy with Autoglym overall. The products leave my 4WD looking really clean, glossy and well protected, and they’re easy to use with great results. The only thing I’ve found is that the baked-on bugs on the front of my 4WD can be pretty stubborn and don’t completely come off with the product on its own. I’ve tried it a few times and it definitely improves them, but some of the really stuck-on ones still need a bit of extra work. Apart from that, I’ve been really impressed with the products and would definitely recommend Autoglym.
(5)
Good purchase
By: Jeremy on 26 May 2026Very happy with the bundle I purchased. Foam canon is of good quality with heavy duty brass fittings, foamed up well on first attempt. Other products worked well. Pricing online was very competitive compared to bigger name stores. Product arrived very quick and well packaged, will be purchasing from this store again
(5)
MartyG
By: Martin Griffith on 21 July 2025Really good service, quick delivery
(5)





