- Click & Collect available from Mitcham or Sunshine VIC
RAGE GOLD
PREMIUM LIGHTWEIGHT BODY FILLER
NOTE: This product is only available for Local Pickup, NO POSTAGE
RAGE® GOLD is EVERCOATS® easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite, a unique ingredient, which reduces heat and friction created by aggressive sanding. RAGE® GOLD also contains ZNX-7 for adhesion to galvanized steel and aluminum. Plus, its stain resistant for use with basecoat/clearcoat paints. Part of the METALWORKS® System. Blue cream hardener included
FEATURES & BENEFITS:
Contains Hattonite, which greatly improves sandability.
METALWORKS® product that contains ZNX-7, which offers superior adhesion to galvanized steel and aluminium, and honours the OEM corrosion warranty.
Formulated with finest quality resin available. The same as EVERCOATS® polyester glazing putties.
Vacuum processed, extra smooth formula for improved spreadability and reduced pinholes.
Tack free, prevents sandpaper clogging which reduces labour and sandpaper costs.
Stain resistant formula, reduces the chances of staining and costly come backs on basecoat/clearcoat paint systems.
Part of the METALWORKS® Intermix System for custom blending with glazing putties. It enhances the working properties and makes the filler more user-friendly when repairing sensitive metals.
USES: Use for heavy filling and repair of damaged panels up to ¼ in depth.
APPROVED SUBSTRATES: Steel, galvanized and other zinc coated steel, SMC, fiberrglass and aluminium. Can be used for cosmetic fiberglass and composite repairs. For structural repairs prone to high degrees of stress and flexibility, use a fiber reinforced filler.
PREPARATION: Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry surface before repairing. Keep the repair area small. Grind repair area with 40 50 grit for large areas, or 80 grit for small areas, removing only the paint. Use 80 grit to remove the 40-50 grit marks and to featheredge the paint. Featheredge inward toward the repair.
MIXING: Stir the body filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4 diameter puddle). Puddles larger than 4 in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.
APPLICATION: Apply in thin layers and spread smoothly. Do not blob on or apply all at once.
FINISH: Sand down body filler with 40 grit to 80 grit sandpaper (use 40 grit as an initial cut only when necessary to knock down high spots). Avoid coarse sand scratches outside the filler area during the initial cut. Finish sand body filler with 80 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches.
TECHNICAL
SPECIFICATIONS:
Appearance
Smooth golden colour paste
VOC
Packaged: 1.22 lbs per gal or 146.4 g/L
Applied: .08 lbs per gal or 9 g/L
Weight per Gallon
9.3 lbs/gal
Gel Time
3-5 minutes
Sand Time
20 minutes w/ 80 grit
Viscosity
200,000 to 250,000 cps
Shore D Hardness
65 to 70 (24 hr cure)
Lap Shear Adhesion @ 20/40/60 min
1685 psi (sanded steel)
Corrosion Resistance
500 hrs Harsaw salt spray cabinet and 200 hrs@ 100% Rh
Water Resistance
No blistering, wrinkling or softening after 24 hr immersion in water
Max Recommended Thickness (sanded)
¼ inch
Contents and Caution
MSDS Available upon request
Crystalline Silica Content
Contains Crystalline Silica
FEATURES & BENEFITS:
Contains Hattonite, which greatly improves sandability.
METALWORKS® product that contains ZNX-7, which offers superior adhesion to galvanized steel and aluminium, and honours the OEM corrosion warranty.
Formulated with finest quality resin available. The same as EVERCOATS® polyester glazing putties.
Vacuum processed, extra smooth formula for improved spreadability and reduced pinholes.
Tack free, prevents sandpaper clogging which reduces labour and sandpaper costs.
Stain resistant formula, reduces the chances of staining and costly come backs on basecoat/clearcoat paint systems.
Part of the METALWORKS® Intermix System for custom blending with glazing putties. It enhances the working properties and makes the filler more user-friendly when repairing sensitive metals.
USES: Use for heavy filling and repair of damaged panels up to ¼ in depth.
APPROVED SUBSTRATES: Steel, galvanized and other zinc coated steel, SMC, fiberrglass and aluminium. Can be used for cosmetic fiberglass and composite repairs. For structural repairs prone to high degrees of stress and flexibility, use a fiber reinforced filler.
PREPARATION: Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry surface before repairing. Keep the repair area small. Grind repair area with 40 50 grit for large areas, or 80 grit for small areas, removing only the paint. Use 80 grit to remove the 40-50 grit marks and to featheredge the paint. Featheredge inward toward the repair.
MIXING: Stir the body filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4 diameter puddle). Puddles larger than 4 in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.
APPLICATION: Apply in thin layers and spread smoothly. Do not blob on or apply all at once.
FINISH: Sand down body filler with 40 grit to 80 grit sandpaper (use 40 grit as an initial cut only when necessary to knock down high spots). Avoid coarse sand scratches outside the filler area during the initial cut. Finish sand body filler with 80 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches.
TECHNICAL
SPECIFICATIONS:
Appearance
Smooth golden colour paste
VOC
Packaged: 1.22 lbs per gal or 146.4 g/L
Applied: .08 lbs per gal or 9 g/L
Weight per Gallon
9.3 lbs/gal
Gel Time
3-5 minutes
Sand Time
20 minutes w/ 80 grit
Viscosity
200,000 to 250,000 cps
Shore D Hardness
65 to 70 (24 hr cure)
Lap Shear Adhesion @ 20/40/60 min
1685 psi (sanded steel)
Corrosion Resistance
500 hrs Harsaw salt spray cabinet and 200 hrs@ 100% Rh
Water Resistance
No blistering, wrinkling or softening after 24 hr immersion in water
Max Recommended Thickness (sanded)
¼ inch
Contents and Caution
MSDS Available upon request
Crystalline Silica Content
Contains Crystalline Silica
Product documents
View the available product information below.
Be The First To Review This Product!
Help other Jefferson Paint Supplies users shop smarter by writing reviews for products you have purchased.





