SKU: NOCHF08127EZ
Lord Fusor 127EZ Plastic Bonding Adhesive Slow 210ml
Fusor® 127EZ adhesive is a two-component, urethane-based adhesive used for bonding plastic body panels, spoilers and ground effects.
Substrates:
SMC, Fiberglass, Carbon fFber, Plastics, Primed Metal
Features and Benefits:
High Performance provides high strength for structural applications.
Versatile bonds SMC, fiberglass, carbon fiber, plastics, and primed metal.
Convenient provides enough work time for bonding large primed metal or plastic parts.
Non-Sag remains in position when applied on vertical or overhead surfaces; easy to apply.
Applications:
Plastic body panels, spoilers and ground effects; excellent for cab extenders and other surfaces.
How to use the Lord Fusor Plastic Bonding Adhesive (Slow):
- Surface Preparation: Prime bare metal using a two-component epoxy primer. Let the primer dry completely and sand with 180 and 220 grit sandpaper. If it's a plastic surface, clean the area and sand the bonded areas with 80-grit sandpaper.
- Preparing the Product: Insert the two-component adhesive cartridge into the dispensing gun. Squeeze a small amount of adhesive from both sides of the cartridge to level the plungers and take care that the adhesive comes out from both sides. Fix a mixing tip and take out a small amount of material to check if the adhesive is properly mixed.
- Application: Apply a bead large enough (1/2" size) to fill gaps between the panel and the inner reinforcement. Use pressure to clamp panels and hold them in place while squeezing out a small amount of adhesive. Let the adhesive stand and completely cure. Cool to room temperature before unclamping. Prime and paint as per manufacturer recommendations.
Technical Specifications:
|
|
Be The First To Review This Product!
Help other Jefferson Paint Supplies users shop smarter by writing reviews for products you have purchased.
